Author Topic: There is at least one positive pair energy in the explicitly correlated part!  (Read 2197 times)

prasanta13

  • Full Member
  • ***
  • Posts: 36
  • Karma: +0/-0
Hi there,
I am trying to calculate ccsd(t)/aug-cc-pVQZ single point energy for a small molecule.
First I ran dscf (worked well) followed by ccsdf12 (still running).
Looking at ccsdf12 output file, I got this bizarre statement. A snap of the output is given below,
Code: [Select]
  ++ Starting calculation of pair energies.++


     Total noinv-RI-MP2-F12/A contr.: -0.081634802627


Positive pair energy detected:   110.41930994654157E-04
Positive pair energy detected:   220.11159410834232E-05
Positive pair energy detected:   370.28960788488212E-05
Positive pair energy detected:   460.74514191790383E-06
 
 =============== Warning ===================
 There is at least one positive pair energy
 in the explicitly correlated part!
 The positive pair energies are set to NaN.
 ===========================================
 
     Total fixed-RI-MP2-F12/A contr.:             NaN


 CAREFUL!
 We have computed a crappy correlation
 energy! Amplitudes are not stored!!!
 In order to be able to check what could be
 going on, we continue until the energy is
 printed... Check your basis sets!
     Total noinv-RI-MP2-F12/B contr.: -0.077050407447


Positive pair energy detected:   110.16344501857815E-03
Positive pair energy detected:   220.47808455928281E-05
Positive pair energy detected:   290.12783358776923E-03
Positive pair energy detected:   370.19127225718180E-03
Positive pair energy detected:   460.18193945420737E-04
 
 =============== Warning ===================
 There is at least one positive pair energy
 in the explicitly correlated part!
 The positive pair energies are set to NaN.
 ===========================================
 
     Total fixed-RI-MP2-F12/B contr.:             NaN


 CAREFUL!
 We have computed a crappy correlation
 energy! Amplitudes are not stored!!!
 In order to be able to check what could be
 going on, we continue until the energy is
 printed... Check your basis sets!


     time in mp2 energy    cpu:  0.17 sec    wall:  0.00 sec    ratio: 63.4
 
     time in mp2 (NRG)     cpu:  4.48 sec    wall:  0.07 sec    ratio: 63.9
     time in mp2 (all)     cpu: 17 min 48 s  wall:  0 min 21 s  ratio: 51.2


     **********************************************************************
     *             the CCSD(F12*) approximation will be used              *
     **********************************************************************


     time in resort(f12)   cpu:  4.71 sec    wall:  4.78 sec    ratio:  1.0
     threshold for screening of F12 V intermediate: 0.45E-17
     time in Vijmn         cpu:   1 d 17 h 43 min  wall:   0 d  0 h 42 min  ratio: 59.3
     time in Vijmn->Vijkl  cpu:  0.33 sec    wall:  0.32 sec    ratio:  1.0

     Calculate additional intermediates for fixed geminal coefficients

     time in c*V contr.    cpu: 24.61 sec    wall:  0.93 sec    ratio: 26.5
     time in r12 t-amp.    cpu: 19.58 sec    wall:  1.25 sec    ratio: 15.7
     time in 3idx,ccsdint  cpu:  6 min 48 s  wall:  0 min 23 s  ratio: 18.0

     Calculate integrals (ia|jb) for MP2 start guess



     **********************************************************************
     *                                                                    *
     *   RHF  energy                             :   -132.2965497240      *
     *   correction to HF from CABS singles      :     -0.0012818953      *
     *   corrected RHF  energy                   :   -132.2978316193      *
     *                                                                    *
     *   MP2 correlation energy (doubles)        :     -0.6051224995      *
     *   fixed-RI-MP2-F12/2B [F+K] contr.        :               NaN      *
     *   total correlation energy                :               NaN      *
     *                                                                    *
     *   Final MP2-F12 energy                    :               NaN      *
     *   (MP2 energy w/o F12, CABS singles       :   -132.9016722235)     *
     *                                                                    *
     *    E(S)   =     -0.4039616899      E(T)   =     -0.2011608096      *
     *    E(OS)  =     -0.4710152931      E(SS)  =     -0.1341072064      *
     *    F12(S) =               NaN      F12(T) =     -0.0046820586      *
     *    F12(OS)=               NaN      F12(SS)=     -0.0031213724      *
     *                                                                    *
     *   SCS-MP2-F12 energy                      :               NaN      *
     *   (SCS-MP2 energy w/o F12                 :   -132.9064704779)     *
     *   (computed with  C(OS) =   1.2000  and  C(SS) =   0.3333)         *
     *                                                                    *
     *   SOS-MP2-F12 energy                      :               NaN      *
     *   (SOS-MP2 energy w/o F12                 :   -132.9088696051)     *
     *   (computed with  C(OS) =   1.3000)                                *
     *                                                                    *
     *   Norm of MP1 T2 amplitudes               :      0.2220257492      *
     *                                                                    *
     **********************************************************************

     time in ccsdint       cpu:   1 d 18 h  2 min  wall:   0 d  0 h 43 min  ratio: 58.6


   **************************************************************************
   *                                                                        *
   *          OPTIMIZATION OF THE GROUND STATE CLUSTER AMPLITUDES           *
   *                                                                        *
   **************************************************************************
I am also sharing the control file.
Code: [Select]
$title
$symmetry c1
$user-defined bonds    file=coord
$coord    file=coord
$optimize
 internal   off
 redundant  off
 cartesian  on
 global     off
 basis      off
$atoms
    basis =aug-cc-pVQZ
    cabs  =aug-cc-pVQZ
    cbas  =aug-cc-pVQZ
    jkbas =aug-cc-pVQZ
$basis    file=basis
$scfmo   file=mos
$closed shells
 a       1-10                                   ( 2 )
$scfiterlimit       30
$scfconv        7
$thize     0.10000000E-04
$thime        5
$scfdamp   start=0.300  step=0.050  min=0.100
$scfdump
$scfintunit
 unit=30       size=0        file=twoint
$scfdiis
$maxcor    500 MiB  per_core
$scforbitalshift  automatic=.1
$drvopt
   cartesian  on
   basis      off
   global     off
   hessian    on
   dipole     on
   nuclear polarizability
$interconversion  off
   qconv=1.d-7
   maxiter=25
$coordinateupdate
   dqmax=0.3
   interpolate  on
   statistics    5
$forceupdate
   ahlrichs numgeo=0  mingeo=3 maxgeo=4 modus=<g|dq> dynamic fail=0.3
   threig=0.005  reseig=0.005  thrbig=3.0  scale=1.00  damping=0.0
$forceinit on
   diag=default
$energy    file=energy
$grad    file=gradient
$forceapprox    file=forceapprox
$denconv     0.10000000E-06
$rir12
  ansatz      2
  ccsdapprox  ccsd(f12*)
  no_f12metric
  r12model    B
  comaprox    F+K
  cabs        svd  1.0000E-08
  examp       fixed  noflip
  corrfac     LCG
  cabsingles  on
$lcg
  nlcg    6
  slater  1.4000
$ricc2
  ccsd(t)
$rundimensions
   natoms=7
   nbf(CAO)=485
   nbf(AO)=390
$actual step      ccsdf12
$last SCF energy change = -.45088200E-09
$charge from dscf
         -0.000 (not to be modified here)
$dipole from dscf
  x    -0.00000000000002    y     0.52841373220459    z     1.29921323297381    a.u.
   | dipole | =    3.5649802707  debye
$cabs file=auxbasis
$jkbas file=auxbasis
$cbas file=auxbasis
$last CCSD(T) energy change= -.68838301
$orbital_max_rnorm 0.22364354438859E-05
$end

What is the source of this problem, and what is the solution?
Thanks in advance.
Prasanta

christof.haettig

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 291
  • Karma: +0/-0
    • Hattig's Group at the RUB
I suggest that you contact directly the support or the developers.